Characterizing Inkjet-Printed Localized n+ and p+ Poly-Si Passivating Contacts for Silicon Solar Cells: Comparisons and Insights (2025)

Table of Contents
ACS Applied Materials & Interfaces Publication History Abstract Subjects Keywords Read this article Purchase Access Access through Your Institution Log in to Access Cited By ACS Applied Materials & Interfaces Publication History Article Views Altmetric Citations Recommended Articles References

    Energy, Environmental, and Catalysis Applications

    Other Access Options

    ACS Applied Materials & Interfaces

    Cite this: ACS Appl. Mater. Interfaces 2025, XXXX, XXX, XXX-XXX

    Click to copy citationCitation copied!

    https://pubs.acs.org/doi/10.1021/acsami.5c05734

    Published April 28, 2025

    Publication History

    • Received

    • Accepted

    • Revised

    • Published

      online

    research-article

    © 2025 American Chemical Society

    Request reuse permissions

    Abstract

    Click to copy section linkSection link copied!

    Characterizing Inkjet-Printed Localized n+ and p+ Poly-Si Passivating Contacts for Silicon Solar Cells: Comparisons and Insights (7)

    Herein, we fabricate and characterize localized boron- and phosphorus-doped polycrystalline silicon (poly-Si)/SiOx passivating contacts for silicon solar cells by maskless inkjet printing technology with commercially sourced liquid dopant inks. Moreover, we leverage the advantages of inkjet printing to demonstrate the simultaneous formation of localized p+ and n+ poly-Si/SiOx passivating contact lines by a single anneal at 950 °C for 60 min. Optical microscopy images reveal well-defined dopant lines with features down to ∼60 μm. Microphotoluminescence (μPL) mapping confirms the enhanced surface passivation in the locally printed regions compared to the unprinted regions due to doping. In addition, high-resolution dynamic secondary ion mass spectrometry (SIMS) measurements quantify the total dopant concentrations in the lines, and electrochemical capacitance–voltage (ECV) was applied to measure the electrically active dopant concentrations in co-processed pads. The μPL and SIMS maps clearly reflect the line shapes from optical microscopy images, and exhibit sharp line features, irrespective of line widths or dopant species. More importantly, SIMS analysis highlights unintended doping in unprinted regions and cross-doping when both polarities are co-annealed. Introducing a thick spin-on SiOx protective layer in unprinted regions effectively mitigates unintended doping. Comparison of the μPL and SIMS maps suggests that the unintended doping arises from volatile dopant species released into the gas phase, rather than from the lateral diffusion of dopants. The benefits and limitations of the characterization methods are also discussed. These findings provide valuable insights for the further optimization of inkjet printing for localized doping of poly-Si/SiOx passivating contacts, particularly in interdigitated back contact solar cell architectures.

    ACS Publications

    © 2025 American Chemical Society

    Subjects

    what are subjects

    Article subjects are automatically applied from the ACS Subject Taxonomy and describe the scientific concepts and themes of the article.

    • Boron
    • Doping
    • Impurities
    • Layers
    • Phosphorus

    Keywords

    what are keywords

    Article keywords are supplied by the authors and highlight key terms and topics of the paper.

    Read this article

    To access this article, please review the available access options below.

    Get instant access

    Purchase Access

    Read this article for 48 hours. Check out below using your ACS ID or as a guest.

    Recommended

    Access through Your Institution

    You may have access to this article through your institution.

    Your institution does not have access to this content. Add or change your institution or let them know you’d like them to include access.

    Recommended

    Log in to Access

    You may have access to this article with your ACS ID if you have previously purchased it or have ACS member benefits. Log in below.

    • Purchase access

      Purchase this article for 48 hours $48.00 Add to cart

      Purchase this article for 48 hours Checkout

    Cited By

    Click to copy section linkSection link copied!

    This article has not yet been cited by other publications.

    Download PDF

    Get e-Alerts

    Get e-Alerts

    ACS Applied Materials & Interfaces

    Cite this: ACS Appl. Mater. Interfaces 2025, XXXX, XXX, XXX-XXX

    Click to copy citationCitation copied!

    Published April 28, 2025

    Publication History

    • Received

    • Accepted

    • Revised

    • Published

      online

    © 2025 American Chemical Society

    Request reuse permissions

    Article Views

    -

    Altmetric

    -

    Citations

    -

    Learn about these metrics

    Article Views are the COUNTER-compliant sum of full text article downloads since November 2008 (both PDF and HTML) across all institutions and individuals. These metrics are regularly updated to reflect usage leading up to the last few days.

    Citations are the number of other articles citing this article, calculated by Crossref and updated daily. Find more information about Crossref citation counts.

    The Altmetric Attention Score is a quantitative measure of the attention that a research article has received online. Clicking on the donut icon will load a page at altmetric.com with additional details about the score and the social media presence for the given article. Find more information on the Altmetric Attention Score and how the score is calculated.

    Recommended Articles

    Characterizing Inkjet-Printed Localized n+ and p+ Poly-Si Passivating Contacts for Silicon Solar Cells: Comparisons and Insights (2025)

    References

    Top Articles
    Labour market overview, UK - Office for National Statistics
    How long does dog tooth extraction surgery take? - The Environmental Literacy Council
    Prediction: President Donald Trump Will Break His Social Security Promise and Propose Cuts -- Just Not in the Way You Might Think | The Motley Fool
    Latest Posts
    Watteträger Cotton Applicator Wattehalter Sonde Bohrer Chirurgische Instrument • EUR 15,00
    Where is flu surging in the US? Some hospitals are overwhelmed in states with high rates
    Recommended Articles
    Article information

    Author: Otha Schamberger

    Last Updated:

    Views: 6324

    Rating: 4.4 / 5 (75 voted)

    Reviews: 90% of readers found this page helpful

    Author information

    Name: Otha Schamberger

    Birthday: 1999-08-15

    Address: Suite 490 606 Hammes Ferry, Carterhaven, IL 62290

    Phone: +8557035444877

    Job: Forward IT Agent

    Hobby: Fishing, Flying, Jewelry making, Digital arts, Sand art, Parkour, tabletop games

    Introduction: My name is Otha Schamberger, I am a vast, good, healthy, cheerful, energetic, gorgeous, magnificent person who loves writing and wants to share my knowledge and understanding with you.